1
Discussion Board Troubleshooting / Using Flash to embed youtube videos....
« on: February 13, 2016, 04:32:34 PM »
Richard has enabled flash... Which means we can embed videos from youtube. I am sure you can do other things but I've only used it for videos....
Basically it goes like this:
1. Start your flash command by using the
button above. It should provide both ends of the flash command.
2. Set your size (you have to or it won't work). I suggest "=650,390".... or else the default is "200,200".
3. You want to paste in the youtube address. Here is where it gets a bit tricky. You want it to use the old youtube "https://www.youtube.com/v/" coding like this - https://www.youtube.com/v/BUKV9TKBEwo You can copy and paste the last part of the web address. For example https://www.youtube.com/watch?v=BUKV9TKBEwo - you would copy the "BUKV9TKBEwo"
https://www.youtube.com/v/BUKV9TKBEwo
https://www.youtube.com/v/BUKV9TKBEwo
I know this seems painful but one guy use to have a encoder and if I can find it I will share...
Basically it goes like this:
1. Start your flash command by using the

2. Set your size (you have to or it won't work). I suggest "=650,390".... or else the default is "200,200".
3. You want to paste in the youtube address. Here is where it gets a bit tricky. You want it to use the old youtube "https://www.youtube.com/v/" coding like this - https://www.youtube.com/v/BUKV9TKBEwo You can copy and paste the last part of the web address. For example https://www.youtube.com/watch?v=BUKV9TKBEwo - you would copy the "BUKV9TKBEwo"
https://www.youtube.com/v/BUKV9TKBEwo
I know this seems painful but one guy use to have a encoder and if I can find it I will share...